What is the optimal weight for a cue?
For your main playing cue, use whatever weight feels most comfortable. 19oz is a common weight and a good starting point. The most important advice concerning choices for both playing cue weight and tip hardness is to pick something a stick with it. For more information, see selecting a cue.
A heavier cue will tend to create more CB speed for a given stroke effort. A heavier cue might also be easier for some to keep on line during the stroke, but this is a very individual thing. More weight can also help prevent stroke deceleration. Also, a heavier cue might tend to have a shaft with more endmass (although, this isn’t necessarily so). If that is the case, the heavier cue will create more squirt (AKA “cue ball deflection”), which can have both advantages and disadvantages for different people. Another potential pitfall with a heavy cue is that it could result in double hits, pushes, or miscues at large tip offsets per the info on the maximum sidespin resource page. A heavier cue might also make it more difficult to avoid a double hit when shooting into the CB a small gap away from an OB.
Now, for a break cue, the optimal weight for maximum cue ball (CB) speed will depend on your arm anatomy (the size and weights of the different parts of your arm), muscle physiology (e.g., fast-twitch vs. slow-twitch muscle fiber dominance), technique, and timing. The only way to find out the optimal weight for sure is to experiment. Cue weight is not just a question of physics. Physiology also comes into play. Some people have more fast-twitch muscle fibers than others. Because of this, cue weight selection can be a very personal thing. Also, some people might have better accuracy stroking a heavier cue at a slower speed than a lighter cue at a faster speed. Also, some people might prefer a lighter or heavier cue just because of the way it feels, regardless of how better or worse the performance might be. Also, if your break cue is a combination jump-break cue, you might want a lighter weight since jumping can be easier with a lighter jump cue. Again, the choice of break cue weight is not a simple matter of physics.
Concerning the physics, what determines the CB speed is the cue’s mass and the cue’s speed at impact with the ball, and CB speed is what we are striving for (in addition to accuracy). For a given cue speed, if the cue has more mass, the CB will go faster; and for a given cue mass, if the cue has more speed, the CB will go faster. Both factors (cue speed and cue mass) are important. Some people can generate more breaking power with a lighter cue, and some can generate more with a heavier cue. A detailed analysis of the physics of how CB speed varies with both cue mass and speed (and tip offset from center, and tip efficiency) can be found in TP A.30. Breaking power is related to the square of CB speed, and CB speed is directly related to cue stick speed, so if you can increase the speed of your break stroke while maintaining accuracy, it can result in a big improvement in break effectiveness. And if you can also use a heavier cue, and maintain the same or similar cue speed, you can also increase breaking power; although, increases in cue weight don’t have as large of a benefit as increases in cue speed (see details below).
Cue and tip efficiency can also affect breaking performance; although, some people might not like the feel of the hit with a really hard and efficient tip (e.g., phenolic). Based on the numbers in TP A.30, changing from a medium-hardness leather tip on a typical playing cue (typical COR = 0.73) to a phenolic tip on a break cue (with a COR as high as 0.87), can increase breaking power by 17%! For comparison purposes (see the end of TP A.30 for details), if you could increase your cue speed by 10%, the cue ball speed would also increase by 10%, and the effective increase in breaking power would be 21%. And for a given cue speed, if you could increase the cue weight from 17 to 22 oz (while maintaining the same speed), the cue ball speed would increase by 6.3%, which would correspond to an effective increase in breaking power of 13%. So with a dramatic increase in cue weight (17 oz to 22 oz), the benefit is not as large as one might expect, even if the heavier cue could be stroked at the same speed as the lighter cue (which is usually not the case).
As mentioned above, the optimal cue weight for each individual, providing the best combination of cue speed and weight to produce the best breaking power, is a very personal thing. The only way to determine the optimal weight is to experiment. And even if you are using the optimal-weight cue and are generating the most cue speed possible, none of that will matter if you are not using good technique to get a square hit on the lead ball or if you are getting too much unintentional sidespin or CB hop. You should only use as much speed as you can control.
A good analogy to pool break cue weight selection is baseball bat weight selection. A lighter bat can be swung faster, but a heavier bat has more mass. Some players can generate more ball speed (and distance) with a heavier bat (e.g., Babe Ruth), and some do better with a much lighter bat (e.g., Barry Bonds). An excellent webpage dealing with baseball bat weight effects can be found here: Bat Weight, Swing Speed and Ball Velocity. Notice the ball speed vs. bat weight graphs about 3/4 down on the webpage. They are very flat at the optimal weight, implying bat weight doesn’t really make that much difference in the range of typical values. This effect should be similar with break cues. If you are in your preferred weight range, an ounce more or less shouldn’t make much difference.
For more information, see: “Optimal Cue Weight” (BD, October, 2015).
For information on how cue weight affects draw shots, see draw shot cue weight effects.
For the effect of different weight distribution, see balance point.
From pooltchr (concerning a playing cue):
1. I believe the best weight for any player is the weight that feels most comfortable for all types of shots.
2. I believe that different weights can produce slightly different results, but those differences are so slight that most good players can adapt their stroke to get the desired results regardless of the chosen weight.
3. While a long draw shot does require more speed than a shorter one (adjusting speed and or spin is the only way to control draw)we still don’t need to use maximum (break) speed even for maximum draw. For that reason, I think any good player can get the required speed with any weight cue. Those same players would be able to adjust their stroke to compensate for the weight differences in various cues.
4. Since over the course of a game, a player will need to vary speed and spin from shot to shot, the most comfortable weight to the individual player makes the most sense to me. It’s easier to make slight adjustments to speed and spin with a well balanced comfortable cue. You can establish a centergistic or reference point for a stroke speed follow shot, then work from there to know what is needed when you need to do something else with the cue ball.
Dr. Dave keeps this site commercial free, with no ads.If you appreciate the free resources, please consider making a one-time or monthly donation to show your support:
